|
 |
|
|
 | Kuryakyn Floorboard Eliminator Forward Control Kit (9043)
Küryakyn has made it easy and affordable to convert the OEM driver's floorboards to forward controls. These kits contain everything needed to make the conversion. The eliminators are based on our Extended Forward Control Kits so they are ideal for taller riders looking to stretch out. Two versions are available to cover all FLST models from 2000 to present. Includes Girder Shift Lever, ISO-Shift Peg and ISO-Brake Pedal Pad. H-D style male mount footpegs sold separately.
Fits '89-'99 FLST
Price: £471.61 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Forward Controls for Dyna
Our second generation of forward controls. Several aesthetic and functional improvements were made to give you even more for your customizing dollar. The main components visually fit with existing shapes on the engine, primary, and frame. Flush countersunk fasteners are used exclusively on mounting plates for a clean, uncluttered appearance. All ball joints, linkages, and visible hardware are also treated to a beautiful chrome finish. Igus shifter bearings provide smooth, maintenance-free operation. These controls offer outstanding good looks, are user-friendly, and provide excellent value in a moderate price range. Footpegs Not Included
Note: Forward Controls are not compatible with most engine Guards.
Price: £284.26 (Including VAT at 17.5%)
Choose Type
|
CATALOG SUSPENDED |
|
|
 | Kuryakyn Extension Kit for Dyna Wide Glide Forward Controls
Welcome relief for tall Dyna Wide Glide riders. This kit moves the existing, stock forward controls a full three inches farther forward. The set includes extension plates, countersunk trim plates, linkages, and all hardware. All components are show-chromed. Only basic hand tools are needed to complete this easy installation.
Note: Must be using using H-D Forward Controls (P/N 49080-03).
Price: £149.75 (Including VAT at 17.5%)
Choose Type
|
CATALOG SUSPENDED |
|
|
 | Kuryakyn 3-1/4" Extended Forward Controls for 2000 to 2006 FXST (9041)
If you're a little taller than average and ride an FXST Standard, Springer, Night Train, or Deuce, you can breathe a sigh of relief; Küryakyn has extended forward controls for you! Our beautifully sculpted, investment cast mounting plates are nicely polished and chrome plated. This kit reuses the stock shift lever, splined shift shaft, brake pedal, and master cylinder. Aside from the plates, it includes an extended length braided stainless brake line and all necessary hardware. Accepts any H-D style male mount footpegs, sold separately. This awesome kit is an excellent value!
Price: £312.70 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Brake Rod Cover for Sportster (9042)
Take your plain zinc plated brake rod to full chrome look with our precision fitted chrome cover. No tools needed to install this “snap-on” show-chromed cover that hides the ends and melds nicely with the rest of your sparkling engine. We’ve got your brake rod covered! Fits: ’04-’05 XL1200C and XL883C (Also fits ’04-’05 Sportster models equipped with H-D accessory forward controls, H-D P/Ns 33395-04 or 33398-04)
Price: £36.74 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Girder Style Extended Brake Pedals for Footboard Equipped Models (1027)
Wishing for more legroom on your footboard-equipped Harley? No Problem!
We offer our Extended Brake Pedal in two styles, traditional and girder design. Both levers share the same shape, moving the location of the brake pedal pad forward and down while flattening the angle of the pad. The result is that your foot is no longer “under” the brake pedal, which makes the movement needed to apply the rear brake feel much more natural. Both levers are beautifully polished and chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation and long life.
Our Extended Brake Pedals are compatible with engine guard mounted cruise pegs and the Cruise Arm Mark III. However, adjustment of the Cruise Arm Mark III may be slightly reduced.
Fits: ’97-’05 FLT (Dressers and Road Kings) and ’87-’05 FLST Models.
Note: on ‘02-later models, our extended brake pedals provide only slightly more extension then stock, but the brake pedal pad is slightly lower and flatter, making the transition from board to brake more natural.
Price: £71.42 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
| Kuryakyn Extended Brake Pedals for Footboard Equipped Models (9061)
Wishing for more legroom on your footboard-equipped Harley? No Problem!
We offer our Extended Brake Pedal in two styles, traditional and girder design. Both levers share the same shape, moving the location of the brake pedal pad forward and down while flattening the angle of the pad. The result is that your foot is no longer “under” the brake pedal, which makes the movement needed to apply the rear brake feel much more natural. Both levers are beautifully polished and chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation and long life.
Our Extended Brake Pedals are compatible with engine guard mounted cruise pegs and the Cruise Arm Mark III. However, adjustment of the Cruise Arm Mark III may be slightly reduced.
Fits: ’97-’05 FLT (Dressers and Road Kings) and ’87-’05 FLST Models.
Note: on ‘02-later models, our extended brake pedals provide only slightly more extension then stock, but the brake pedal pad is slightly lower and flatter, making the transition from board to brake more natural.
Price: £55.54 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
|
|
 | Kuryakyn Extended Girder Shift Lever (1026)
Our new Extended Girder Shift Lever is the perfect complement to our Extended Girder Brake Pedal. With an 8" length, it is about 1-3/4" longer than a stock FLT or FLST shift lever. It works as both front or rear on footboard equipped Harleys. This chrome beauty will give you a lot of additional room on the footboard. You can slide your foot around without having to worry about bumping into your shift pegs. If you decide to remove your rear shift lever altogether, you’ll need to purchase one of our Heel Shift Eliminators, sold separately.
Price: £63.47 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Rear Shift Lever Eliminator
By Miles Ahead™
Many riders find the heel-toe shifter set-up is unnecessary and makes it difficult to find a comfortable position on the footboard. These premium quality accessories quickly and easily allow you to remove the heel shift lever on Dressers, Road Kings, or any FLST model. Unique design keeps the shift shaft in perfect alignment to avoid premature shaft wear, a problem common to similar products. The rubber lining eliminates rattles and keeps your bike shifting as smoothly as ever. This is a must-have accessory for anyone installing a left-side Heel Guard™ on their motorcycle.
Price: £27.55 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Heel Shift Eliminator (1031)
This simple chrome accessory lets you easily eliminate the heel (rear) shift lever. Many riders never use the heel shift lever and installation of this handy product gives them more room on their footboard
Price: £22.96 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Shifter Spline Cover (9072)
Many riders of floorboard equipped Harleys remove their heel shift lever to create more room for their feet on the floorboard or because they simply prefer to shift with their toe only. Removing the heel shift lever is an easy task, but it leaves the unsightly shifter spline exposed. Our slick little chrome cover solves that problem quickly and inexpensively
Price: £8.26 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
|
|
|
|
| Kuryakyn Custom Extruded Shift Linkage (9059)
Our Extruded Shift Linkage has a massive bold look. Threaded inserts at each end and long skirted lock nuts provide a wide range of adjustment. Heavy duty universal joints insure smooth shifting. Each linkage includes a pair of red, blue and chrome lock nuts for a personalized styling touch. Fits Softail (ex. '97-'99 FLSTS), all FLT, (Dressers and Road Kings) and all FXDWG.
Price: £59.44 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn EZ Brake Pedal
Riders of Harley-Davidsons® equipped with floorboards have always had to struggle with the stock rear brake pedal. The stock pedal deprives you of foot space, which quickly gets uncomfortable. Having to swing your foot out from under the pedal in order to brake is awkward at best, unsafe at worst. E-Z Brake is an easy, custom fix to the problem. The E-Z Brake puts the brake pedal forward, in front of your foot. That gives you room to rest and move your foot, it makes braking easier and safer, and it gives your bike a great custom look.
Price: £145.55 (Including VAT at 17.5%)
Choose Type
|
CATALOG SUSPENDED |
|
|
 | Kuryakyn E-Z Shift Levers for Footboard Equipped Models
Longer than the stock versions, these stylish levers move the shift peg away from the footboard so your foot doesn’t feel so cramped for space. The two levers, when installed correctly, are parallel to one another for a look that’s twice as classy.
Price: £78.42 (Including VAT at 17.5%)
Choose Type
|
CATALOG SUSPENDED |
|
|
