|
 |
 | Kuryakyn L.E.D. Fuel and Battery Gauge (8303)
A perfect match to our flush mount gas cap, the informer replaces the bulbous and difficult to read stock fuel gauge. Its sleek, low profile design incorporates both an L.E.D. fuel gauge and an L.E.D. battery gauge. Color-coded L.E.D.s make them readable at a glance from the saddle. A daylight sensor automatically adjusts the brightness of the L.E.D.s. they are bright during the day for visibility and dim at night so as not to blind the rider.
The fuel gauge has a string of color coded L.E.D.s to indicate fuel level. When full, a single green L.E.D. will be illuminated at the far end of the string. When the tank is virtually empty, a single red L.E.D. will flash at the beginning of the string. At all fuel levels in-between, there will be two L.E.D.s in the string illuminated at a time. Red L.E.D.s appear from empty to 1/8 tank, amber L.E.D.s appear from 1/4 to 1/2 tank, and green L.E.D.s appear from 5/8 to full. A quick glance is all it takes to know when it's time to refuel.
The Battery Gauge is an array of L.E.D.s that indicate the operating voltage of the bike's electrical system. Green L.E.D.s represent the normal, safe operating range, 12.5v to 14.5v, of your charging system. Amber L.E.D.s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider of an impending stall or the possibility of damage to the battery and/or sensitive electronic components on the motorcycle.
Fits all H-D models with fuel gauge mounted in left fuel tank.
Price: £95.22 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Flush Mount Gas Caps
Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa's Buick. These slick flush mount gas caps have the high-tech look of aviation-style fuel fillers. The built in trim ring protects the painted surface around the filler opening from dings and gas stains. A keyed entry system permits their ultra thin profile and prevents tampering.
Vented and non-vented versions available to fit all screw type H-D tanks from '82-'05. Installation does not require cutting.
Price: £40.06 (Including VAT at 17.5%)
Choose Type
|
CATALOG SUSPENDED |
|
|
|
|
 | Kuryakyn Dash Trim for Road King (1518)
A little trim goes a long way. Place this three-dimensional trim plate at the bottom of the Road King dash for a sleeker, more finished look. Easily installed in only minutes.
Price: £18.37 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
|
|
 | Kuryakyn Visored Speedometer Bezel (112)
This great looking trim ring completely covers the stock stainless steel bezel and incorporates a stylish visor. fits all FL style speedometers with cast dash '68-'04 (Softail, Road King, FXDWG, etc.)
Price: £22.96 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Speedo Trim Ring (106)
An alternative to the Mirage visors, this trim ring is siliconed into position giving the illusion of a recessed speedometer by concealing the unfinished edge surrounding the instrument. Fits all FL style speedometers with cast dash '68-'04 (Softail, road King, FXDWG, etc.)
Price: £18.34 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Iron Cross Phantom Pad (4187)
Phantom Pads offer a quick and easy solution for solo riders that need to carry a passenger from time to time. Easy on/off application via its suction cup bottom - no tools or fasteners needed! There is a wide range of styles to choose including the unique Iron Cross design for even more attitude. Excellent craftsmanship goes into each pad.
This is the ideal pad for the radical choppers of today. Killer looks and both your paint and passenger will appreciate not having to sit on a bar towel. Constructed of SaddleHyde for long life and comfort
Price: £127.30 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Leather Phantom Pads
Phantom Pads offer a quick and easy solution for solo riders that need to carry a passenger from time to time. Easy on/off application via its suction cup bottom - no tools or fasteners needed! There is a wide range of styles to choose including the unique Iron Cross design for even more attitude. Excellent craftsmanship goes into each pad.
Universal fit for most any motorcycle.
• Small – 6” Wide
• Large – 7” Wide
• X-Large – 9” Wide
High-quality leather upper surface with SaddleHyde side panels.
Price: £118.86 (Including VAT at 17.5%)
Choose Size
|
CATALOG SUSPENDED |
|
|
 | Kuryakyn Saddlehyde Phantom Pads
Phantom Pads offer a quick and easy solution for solo riders that need to carry a passenger from time to time. Easy on/off application via its suction cup bottom - no tools or fasteners needed! There is a wide range of styles to choose including the unique Iron Cross design for even more attitude. Excellent craftsmanship goes into each pad.
SaddleHyde combines the soft sheen and velvety texture of fine upholstery leather with the durability and low maintenance of traditional vinyl. SaddleHyde offers the best characteristics of both leather and vinyl: the supple feel and rich look of leather, and the superior water, sun and weather resistance of vinyl.
Price: £109.72 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Plug-N-Play Universal Sissy Bar Mount (8998)
Here’s the easy solution for the rider who carries a passenger, but doesn’t like the look of conventional side plates. The Plug-N-Play bolts to the fender underneath the passenger seat. It accepts OEM or after market sissy bars (6-11/16" wide). Each assembly comes pre-drilled to fit the majority of stock H-D fenders (XL, Dyna and Softail). Does not include hardware.
Price: £125.21 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Petcock Cover (2011)
With its dull industrial finish, a stock gas valve is hardly a thing of beauty, but to replace it with a trick aftermarket unit could cost up to a hundred bucks. Our chrome petcock cover fits stock petcocks '81-'01. A new large hex knob provides easy operation, installation is a snap, and it costs about a third of custom replacement valves.
Price: £27.82 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Deluxe Neck Cover for Touring Models (8146)
Designed from a clean sheet, our new neck cover is a smooth, quickly installed addition to any H-D Touring Model. The right side cover has been enlarged enough to accommodate the in-line cruise control pull-off switch found on the idle cable of all ’02 and later models. This Deluxe kit, P/N 8146, includes two snap on down-tube covers to add coverage almost all the way to the foot board mounts. Easy to install and great looking, this is a truly first class part!
Note: The snap on tube covers that are included in the 8146 kit are offered separately to allow customers that have purchased the basic version of this neck cover, P/N 8168, to upgrade. When ordering P/N 8146, it is NOT necessary to order P/N 8227 separately.
Price: £117.84 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
|
|
 | Kuryakyn Neck Cover for Touring Models (8168)
Designed from a clean sheet, our new neck cover is a smooth, quickly installed addition to any H-D Touring Model. The right side cover has been enlarged enough to accommodate the in-line cruise control pull-off switch found on the idle cable of all ’02 and later models.
The basic kit contains two-pieces to shroud the neck and extends down the frame adding brilliance to an otherwise dull area. Easy to install and great looking, this is a truly first class part!
Note: The snap on tube covers are listed separately for customers that have purchased P/N 8168 and then realized that we offer a Deluxe version that includes them. If you have not yet purchased P/N 8168, we encourage you to look at the Deluxe covers, P/N 8146, before placing your order.
Price: £118.90 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Neck Covers for Dresser and Road King
These neck covers really dress up the exposed frame section of Harley's touring rigs. The wiring harness, throttle cables and several large nasty welds are replaced by a beautiful stylized chrome accent. Mounting hardware is included to accommodate the different tank mounts used on these models. Wiring modifications are required on models using plug-in style ignitions modules that mount on the frame's neck!
Note: Can be installed on '02-later Dressers & Road Kings (ex. Ultra) but idle cable must be replaced with one from an '01-earlier model.
Price: £63.47 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
|
|
 | Kuryakyn Tank Tab Trim for Sportster (1508)
Add sizzle to Sportster fuel tanks with these new show chromed mounting tab covers. Specially designed chrome fasteners blend with the tab covers to complete the installation, and hold all components securely in place. Fits stock XL fuel tanks, '96-'03.
Price: £36.74 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
 | Kuryakyn Relocator Kit for Tour Pak (1527)
Gain a few extra inches for going those extra miles. This handy kit moves the Tour Pak back 2” to provide more room for your passenger. The added space makes things much more comfortable for the passenger and makes climbing on and off much easier, especially if the bike is equipped with a driver backrest.
Note: Not compatible with H-D's accessory enhanced sound system that positions an amplifier under the Tour-Pak.
Price: £139.93 (Including VAT at 17.5%)
CATALOG SUSPENDED |
|
|
